Digital Display Electronic Universal Tensile Testing Machine
ETM-A digital control universal testing machine is used in light
duty tensile, compression, and bending test applications for
metallic, non-metallic, and composite materials.
2. Test capability of machine and relevant Standard:
2.1ISO 6892-1:2016:Metallic materials — Tensile testing as
2.2 IEC 61109-2008 Insulators for overhead lines – Composite
suspension and tension insulators for a.c. systems with a nominal
voltage greater than 1000V
3. Main Technical Parameters:
|Max.load||200 kN||300 kN|
|Load accuracy||Class 1|
|Load range||2%-100% FS|
|Controller||digital display meter (Microprocessor Control)|
|Effective tensile space||600mm|
|Effective Test width||600mm|
|Crossbeam travel speed||0.05-300mm/min|
|Tensile Grips||Tensile grip + Compression Plate|
|Power supply||AC 220V±10%,50Hz (can be customized)|
4. Main Unit Feature:
4.1 Rigid floor-standing frame loading structure with upper space
for tensile and lower one for compression and bending test
4.2 Precise ball screws withstand the whole loading with long-life
use and compact layout. G
4.3 Speed control system is set under the table and comprises the
synchronous toothed belt and pulley for high-efficient
transmission, which are featured with low noise and maintenance
4.4 Fixed crossbeam as upper ones, and sits above the frame and
with middle crossbeam as loading beam with smooth travel when
testing. The high-accuracy sensor is installed below the crossbeam.
4.5 High accuracy load sensor for guarantee accurate and stable
4.6 Wide crossbeam travel speed from 0.05 ~ 500mm / min
4.7 Overload protection: as test force exceeds 2%-5% of the maximum
test force of each file, overload protection, it will stop.
5. Components Supply list
|2||Cross beam||1 set|
|3||High precision screw ball||2 sets|
|4||Servo motor||Taiwan ,1PC|
|5||Load sensor||Made in Jinan 1PC|
|6||Reducers||Made in Tai wan|
|7||Synchronous belt||Made in China jingbo 1PC|
|8||Digital control system||MTS-test 1 set|
Manual Wedge Tensile Grip (Hydraulic Automatic grip optional)
Round specimen clamping range:18-27, 27-36mm
Flat specimen clamping range:9-18, 18-27mm
|Compression Plate: Φ100x100 mm||1 set|
|3||3 point Bending fixture is optional||1 set|
6 Control part
6.1 It can automatically store test data, and automatic calculation
results accordance with the relevant national standards and norms.
6.22 It is ready to use start up, one-button start ,English
language, similar to PDA GPS operation and easy operation
6.3.Small multiple functions keypad, used for fast operation or
input letters and numbers, similar to PDA or Mobile phone
6.4.A large screen liquid crystal display, clear and direct.
6.5 Automatically judge break of specimen, and enter into the next
test, without manual operation
6.6 The powerful test data functions, convenient to modify, delete
and invoke data
6.7 Automatic save test peak value function,and any peak values can
6.8 Full digital integrated motherboard design, no potentiometer,
the programmed control..
1 Force sensor: Maximum full-scale MFS unlimited, bidirectional
measurement, sensitivity: 1/20000MFS,accuracy: 1% of indicating
value, the full digital modulation
2 Stroke measurements: Encoder, 4 frequency double input
3 Speed control, beam displacement pulse steeples speed regulation
4 Provide 4 sets data storage, and can be upgraded.
5 Automatic calculate stress, elongation, tensile strength, peel
strength, tensile strength etc.
6 It can be equipped micro printer, print test data
7 Power supply:220V DC
7. Factory pictures
PS; ( For example,)
Before quoting, some points pls confirm:
1. What material you will test? Metal or rubber or others ?
2. What capacity do you need ?
3. What is specimen size ?
4. If you have any test standard to follow, pls send.